Dedicated servers · United States
A USA dedicated server is a whole machine of your own in a US data center, close to the people who use it. Choose New York, Miami or San Francisco, see which server lines run in that city and what each build costs, and pay one month at a time in US dollars.
No contract. A machine already in the rack is yours about 30 minutes after the order is approved, and a build to order takes 4 to 24 hours when we hold the parts. The payment check comes first and is the part that varies.
01Why the United States
People who need their server physically in the USA usually have one of four reasons. Here is how each of them works with us.
Distance sets most of the delay between a visitor and your server. New York faces the East Coast, Miami faces Florida, the Caribbean and Latin America, and San Francisco faces the West Coast. The board above shows your own round trip to each one.
The disks sit in the building you choose, and no other customer runs anything on the machine. When a client, a contract or an auditor asks where the data is kept, you can give the city and the street address.
Every line sold in a US city is invoiced in USD, one month at a time, with no contract. Pay for 3, 6 or 12 months at once and it is 5%, 10% or 15% cheaper, software licenses excepted. Card, PayPal, ACH, bank transfer and cryptocurrency are all accepted.
If your billing address is in New York State, sales tax is added to software licenses only, such as Windows or a control panel. The server, its port, its addresses and the setup fee carry none, and billing addresses elsewhere carry none at all.
02The lines
These are the 17 server lines we sell in the United States. The price on each row is that line's entry build, with its exact parts written under it, per month in dollars. Every change you make in the configurator is priced from there, and a line costs the same in each US city that has it.
| Line | Memory | Drives | Port | Cities | Entry build |
|---|---|---|---|---|---|
| AMD Opteron X2150Cartridge · 4 cores | 8 GB | SATA SSD | 500 Mbpsup to 1 Gbps | New York | $5/moAMD Opteron X2150 APU, 4 cores 1.1GHz · 8 GB DDR3 · 1 × SATA-SSD 32 GB · 500 MbpsSetup $13 onceConfigure |
| Intel Atom C2730Cartridge · 8 cores | 16 GB | SATA SSD | 500 Mbpsup to 1 Gbps | New York | $21.68/moIntel Atom C2730 Octa Core 1.70 GHz · 16 GB DDR3 · 1 × SATA-SSD 64 GB · 500 MbpsSetup $29 onceConfigure |
| X-Gene ARM v8 64-bitCartridge · 8 cores | 32 GB to 64 GB | SATA SSD | 500 Mbpsup to 10 Gbps | New York, San Francisco | $28.59/moX-Gene Octa-Core ARM v8 64-bit · 32 GB DDR3 · 1 × SATA-SSD 120 GB · 500 MbpsSetup $29 onceConfigure |
| Intel Atom C2750Cartridge · 8 cores | 16 GB to 32 GB | SATA SSD, HDD | 500 Mbpsup to 1 Gbps | New York | $34.40/moIntel Atom C2750 Processor, 8 core 2.4 GHz · 16 GB DDR3 · 1 × SATA 500 GB · 500 MbpsSetup $29 onceConfigure |
| Intel Xeon E3-1284L v4Cartridge · 4 cores | 16 GB to 32 GB | SATA SSD | 500 Mbpsup to 10 Gbps | New York, San Francisco | $46.18/moIntel Xeon E3-1284L v4 Quad Core 2.90 GHz · 16 GB DDR3 · 1 × SATA-SSD 240 GB · 500 MbpsSetup $29 onceConfigure |
| AMD Opteron 6300Rack server, 1 or 2 sockets · 12 to 32 cores | 16 GB to 256 GB | SATA SSD, SAS SSD, HDD | 500 Mbpsup to 20 Gbps | New York, Miami | $51.86/moAMD Opteron 6366 HE Hexadeca Core 1.80 GHz · 16 GB DDR3 · 1 × SATA 500 GB · 500 MbpsSetup $29 onceConfigure |
| Intel Xeon E3-1284L v3Cartridge · 4 cores | 16 GB to 32 GB | SATA SSD | 500 Mbpsup to 1 Gbps | New York | $52.18/moIntel Xeon E3-1284L v3 Quad Core 1.80 GHz · 16 GB DDR3 · 1 × SATA-SSD 240 GB · 500 MbpsSetup $29 onceConfigure |
| Intel Xeon E3-1585L v5Cartridge · 4 cores | 32 GB to 64 GB | NVMe | 1 Gbpsup to 10 Gbps | New York, Miami, San Francisco | $62.58/moIntel Xeon E3-1585L v5 Quad Core 3.00 Ghz · 32 GB DDR4 · 1 × NVMe-SSD 240 GB · 1 GbpsSetup $29 onceConfigure |
| Intel Xeon D-1500Cartridge · 8 to 16 cores | 32 GB to 128 GB | NVMe | 1 Gbpsup to 10 Gbps | New York, Miami, San Francisco | $62.58/moIntel Xeon D-1548 Octa Core 2.00 GHz · 32 GB DDR4 · 1 × NVMe-SSD 240 GB · 1 GbpsSetup $29 onceConfigure |
| Intel Xeon E5-2600 v1/v2Rack server, 1 or 2 sockets · 6 to 20 cores | 32 GB to 256 GB | SATA SSD, SAS SSD, HDD | 1 Gbpsup to 20 Gbps | New York, Miami | $70.93/moIntel Xeon E5-2630L Hex Core 2.00 GHz · 32 GB DDR3 · 2 × SATA 500 GB (RAID 1) · 1 GbpsSetup $29 onceConfigure |
| Intel Xeon E5-2600 v3/v4Rack server, 1 or 2 sockets · 8 to 28 cores | 32 GB to 1 TB | SATA SSD, SAS SSD, HDD | 1 Gbpsup to 40 Gbps | New York, Miami, San Francisco | $73.47/moIntel Xeon E5-2620 v4 Octo Core 2.10 GHz · 32 GB DDR4 · 2 × SATA 500 GB (RAID 1) · 1 GbpsSetup $29 onceConfigure |
| Intel Xeon Silver / GoldRack server, 1 or 2 sockets · 8 to 40 cores | 16 GB to 1 TB | SATA SSD, SAS SSD | 1 Gbpsup to 100 Gbps | New York, Miami, San Francisco | $83.67/moIntel Xeon Silver 4110 8 Core 2.10 GHz · 16 GB DDR4 · 2 × SATA-SSD 240 GB (RAID 1) · 1 GbpsSetup $29 onceConfigure |
| Intel Xeon E5-4600 v1/v2Rack server, 4 sockets · 32 to 48 cores | 64 GB to 512 GB | SATA SSD, SAS SSD, HDD | 500 Mbpsup to 20 Gbps | New York, Miami | $109.69/mo4 × Intel Xeon E5-4650L Octo Core 2.60 GHz · 64 GB DDR3 · 2 × SATA 500 GB (RAID 1) · 500 MbpsSetup $29 onceConfigure |
| Intel Xeon E5-4600 v3/v4Rack server, 4 sockets · 24 to 64 cores | 128 GB to 1 TB | SATA SSD, SAS SSD, HDD | 1 Gbpsup to 20 Gbps | New York, Miami, San Francisco | $186.37/mo4 × Intel Xeon E5-4650 v3 12 Core 2.10 GHz · 128 GB DDR4 · 2 × SATA 500 GB (RAID 1) · 1 GbpsSetup $29 onceConfigure |
| AMD EPYCRack server, 1 or 2 sockets · 8 to 128 cores | 32 GB to 1 TB | SATA SSD, SAS SSD | 1 Gbpsup to 20 Gbps | New York | $217.59/moAMD EPYC 7413 24 CORE 2.65 GHz 128MB L3 CACHE · 32 GB DDR4 · 1 × SATA-SSD 240 GB · 1 GbpsSetup $29 onceConfigure |
| Ampere Altra Q64-22Rack server, 1 socket · 64 cores | 32 GB to 1 TB | SATA SSD, SAS SSD | 1 Gbpsup to 20 Gbps | New York | $288.58/moAmpere Altra Q64-22 2.2GHz 64 Core · 32 GB DDR4 · 1 × SATA-SSD 240 GB · 1 GbpsSetup $29 onceConfigure |
| Intel Xeon GoldRack server, 4 sockets · 64 to 80 cores | 128 GB to 2 TB | SATA SSD, SAS SSD, HDD | 1 Gbpsup to 20 Gbps | New York, San Francisco | $409.38/mo4 × Intel Xeon Gold 6130 16 Core 2.10 GHz · 128 GB DDR4 · 2 × SATA 500 GB (RAID 1) · 1 GbpsSetup $29 onceConfigure |
A cartridge is a small complete server with its own processor, memory, drive and port, sharing a chassis for power and cooling. Rack servers add a hardware RAID controller, much more memory and, on every unit, a management controller with a browser console. Among cartridges the console depends on the line, so ask us on chat before you order if you need one.
A configured order is built for you and pays the setup fee shown on its row, once. A machine already in the rack, taken as it stands, has no setup fee and can also be rented by the hour: those are on the racked servers page. Want a part the table does not show? Build to order lists every option.
03Three cities
Each room has a test address you can ping and a speed test page, so you can check the route from your own network before you order anything.
01US East
Our New York machines are in 60 Hudson Street in lower Manhattan, where we have space with more than one operator. NYI, one of them, states SOC 1, SOC 2, PCI and HIPAA compliance for its space.
162.244.81.23602US Southeast
The Miami machines are in Digital Realty's building at 36 NE 2nd Street, in downtown Miami. The operator lists SOC 2, SOC 3 and PCI DSS for the facility.
38.126.208.23503US West
Our San Francisco room is across the Bay, in Digital Realty's facility at 720 2nd Street in Oakland. The operator lists SOC 2, SOC 3 and PCI DSS for it.
198.145.121.234# Windows, macOS or Linux: one line per city ping 162.244.81.236 # New York ping 38.126.208.235 # Miami ping 198.145.121.234 # San Francisco
To follow a route hop by hop, run tracert on Windows or traceroute on macOS and Linux against the same addresses. The looking glass runs ping, traceroute and BGP lookups from our New York edge.
Your port is not shared with any other customer at the access switch, and nothing meters the traffic that crosses it. Each line includes 1 Gbps or 500 Mbps, the table shows which, and faster ports are an option on the order form.
Most of your users on the East Coast, or a mix of North America and Europe: New York. Florida, the Caribbean or Latin America: Miami. California and the West Coast: San Francisco. If your users are spread across the country, ask a few of them to open this page and compare their numbers on the board at the top.
04Ordering
You choose the city and the parts, we build or hand over the machine, and the login details arrive by email.
Filter the table above by city, then open the line you want. The configurator keeps the cities that line is sold in, so you choose New York, Miami or San Francisco there.
Processor, memory, drives, RAID where the line has a controller, port speed and the operating system: a Linux distribution or Windows Server, with the Windows license added on the order form. Each choice shows its price as you make it.
Pay by card, PayPal, ACH, bank transfer or cryptocurrency. The payment and fraud check comes before anything else, and it is the step whose length varies.
A machine already in the rack is ready about 30 minutes after approval. A build to order takes 4 to 24 hours when we hold the parts, 5 to 10 working days when a part has to be bought in, and 10 to 15 for a scarce one.
05Questions
The one nearest most of your users. New York suits the East Coast and audiences split between North America and Europe, Miami suits Florida, the Caribbean and Latin America, and San Francisco suits the West Coast. The board at the top of this page times your own connection to all three, and each room has a test address you can ping.
Yes. A line costs the same in every US city that sells it, in US dollars. Not every line is sold in every city, though: New York has 17, Miami 8 and San Francisco 8, and the table shows which.
About 30 minutes after the order is approved, for a machine already in the rack. A build to order takes 4 to 24 hours when we hold the parts, 5 to 10 working days when a part has to be bought in, and 10 to 15 for a scarce one. Payment and fraud checks come first, and they are what varies.
Only if your billing address is in New York State, and then only on software licenses: Windows, a control panel or a media server license, for example. The server, its port, its IP addresses and the setup fee are not taxed.
Yes. Nothing counts the traffic on your port, and the port is not shared with any other customer at the access switch. Each line includes 1 Gbps or 500 Mbps, and you can pick a faster port on the order form.
A machine already in the rack, taken as it stands, can be rented by the hour; you will find those on the racked servers page. A configured build is billed by the month.
Once the network has been down for more than 15 consecutive minutes, the service agreement credits you a day of the monthly charge for every cumulative hour that month, up to one month. The agreement also covers a failed part: it is replaced in the time your support tier states on the order form, 24 hours on the included Basic tier and less on the paid tiers.
Start a chat. Our AI answers in seconds and can check your server for you, and a person takes over whenever you ask for one.
Ask in writing within 3 calendar days of first activation and we refund the unused part of the month, less 15%. The details are in the refund policy.
Pick New York, Miami or San Francisco, choose a line, and the configurator prices every part as you go.